MetaWarden
Open betaYour smart meter already knows how hard the house works. MetaWarden reads the meter data file from your network and turns it into plain numbers: the highest demand of the last 12 months, what you use on an average day, and whether the main switch has room for what you want to add.
- Drop in one file, the NEM12 or interval CSV from your electricity distributor's portal.
- Nothing leaves your device. The file is read in your browser and is never uploaded or stored.
- It works on a phone, tablet or PC, and there's nothing to install.
Made for electricians quoting upgrades
Before you quote an EV charger, a heat pump, an induction cooktop or a full gas-to-electric changeover, you need to know whether the supply can take it. A one-off clamp reading only tells you about that afternoon. The meter has every half hour of the past year, including the coldest night and the hottest afternoon.
- You see the real peak. That's the single highest half hour in 12 months, when it happened, and the next highest, so you can tell a one-off from the household's normal.
- Stack the new loads on top. Add an EV charger, heat pump, cooktop or your own load in kW, set when it runs, and see the new peak against the main switch rating.
- Show the customer a clear Fits / Tight / Over limit result with the chart behind it. It makes the case for load management, a bigger main switch or a supply upgrade, or shows that none is needed.
Homeowners can use it too. Check before you buy, then hand the result to your electrician.
What it shows
- Peak demand is the highest half-hour average in kW over the last 12 months of the file, with the date and time.
- Average daily use in kWh, and each month's total and peak.
- The highest half hours, so a meter swap, welder or battery commissioning day can be ignored and the usual peak checked instead.
- The load check compares the measured peak plus your added loads against main switch amps × volts × phases. Above 80% of the limit counts as tight.
How to get your meter data
Your interval data comes from your distributor, the company that owns the poles and wires and reads the meter, not your retailer. It's named on your bill, next to your NMI (the 10 or 11 character meter number). Ask for the detailed or interval data, ideally in NEM12 format, covering at least the last 12 months.
Powercor, CitiPower and United Energy (Victoria)
- Register for the distributor's myEnergy portal with your NMI and a recent bill, then sign in.
- Open the option to download your data and choose the detailed (half-hourly) export. The summary file only has daily totals, which can't show a peak.
- Pick the widest date range offered (12 months or more) and download the file.
- Open MetaWarden and drop the file in. Don't change or re-save it in Excel first.
Everywhere else
- Other Victorian networks are AusNet Services (myHomeEnergy portal) and Jemena (request by form or email).
- In NSW and ACT, Ausgrid, Endeavour Energy, Essential Energy and Evoenergy take an online meter data request form.
- In Queensland, Energex and Ergon Energy take an online metering data request.
- In South Australia, SA Power Networks has a customer portal with a CSV download.
- In Tasmania, ask your retailer.
- In Western Australia, contact Western Power or Horizon Power. Their files may not be NEM12, but an interval CSV with a date and a reading per half hour also works.
Search "<your distributor> meter data" for the current portal or form. Requests by form usually arrive by email within 10 business days. If you're sent a PDF, reply and ask for the NEM12 CSV instead.
Electricians: getting a customer's data
Meter data belongs to the account holder. The simplest way is to have the customer download the file from their portal and send it to you. Distributors can also release it to you with the account holder's signed authority.
Before you rely on the numbers
- It's an estimate, not a design. Meter data is half-hour averages, so short spikes such as a motor starting or several elements switching on together can run higher than the peak shown. Use MetaWarden to make an informed call, then check maximum demand to AS/NZS 3000 and the network's requirements before any work.
- With solar and batteries, MetaWarden uses grid import. A battery or solar that covered part of a peak hides that load from the meter, so allow for it if those systems could be off.
- The main switch rating starts at 63 A, so set it to the rating on the switch at the property.
- The file stays in your browser. See the privacy policy.
Free to use
If MetaWarden saved you a site visit, you can chip in to keep it going. It's up to you, and it works the same either way.